The Standard in
Plant Stress Measurement
Systems
CCM-200plus
Chlorophyll Content Meter
Proven performance at a great price
The CCM-200 plus Chlorophyll Content Meter is an updated version of the very successful CCM-200 instrument. It is a reliable leaf absorption style meter with over 1,000 research citations. Designed as an affordable solution, the CCM-200 plus provides averaging between 2 to 30 samples for nitrogen management. Non-volatile flash memory stores up to 50,000 measurements.
Features
- Fast, non-destructive measurement at an affordable price
- Cited by more than 1,000 published scientific papers
- User selected sample averaging size from 2-30 measurements for nitrogen management applications
- Data stored in comma delimited files
- Integrated GPS/GLONASS location receiver
- USB port for easy data transfer
- Lightweight, Hand-Held Design Optimized for Field Work
- Displays Chlorophyll Content Index (CCI)
The CCM-200 plus is designed to be the most repeatable portable chlorophyll content meter available. It incorporates a large measuring area for signal averaging. This approach provides a more reliable reading that takes into account small structure variations that can affect repeatability and reliability when compared to smaller area sampling. Accuracy of measurement is determined by correlation with chemical tests. Results have shown that the CCM-200 is as accurate as any chlorophyll meter on the market. Employing a medical grade strict tolerance LED source insures repeatability and consistent meter to meter readings.
The CCM-200 plus has large on-board memory, storing 50,000 measurements. Users can record months of measurements as well as input their own comment lines without worrying about limited memory or lugging additional equipment such as data loggers or PCs in the field. Data transfer is quick and easy through USB connection.
Measured Parameters:
Optical absorbance in two different wavebands: 653nm & 931nm.
GPS location.
Measurement Area:
9.52 mm (3/8") diameter circle (71 mm2).
Resolution:
.1 CCI unit.
Repeatability:
+/- 1%.
Source:
Custom 2 wavelength LED module.
Detector:
Silicon photodiode.
GPS location:
Built in GPS / GLONASS 12 channel receiver with internal antenna.
Storage Capacity:
Up to 50,000 data measurements.
Data Modes: (3)
Single point, user selectable from 1-30 point averaging, and a statistical 10-30 point protocol that asks to replace data points beyond a 2 sigma standard deviation.
User Interface
128 x 32 pixel graphic display, beep signals, keys for: setup, measurement protocols, diagnostics, data control and user input of alphanumeric comment lines.
Output:
USB removable storage device standard. Comma delimited files.
Temperature Range:
0 - 50oC, non condensing.
Power Source:
9V Alkaline battery.
Auto Off Interval:
4 minutes (no key press or data download).
Size:
152(L) x 82(W) x 25(D) mm.
Weight with battery:
210 g.
Specifications subject to change without notice.
PDF document.
Enter the information below, and a representative will respond to your request.
For the full product line, use the Request For Quote page.
Protective transport case included
Opti-Sciences, Inc. 8 Winn Avenue Hudson NH 03051 USA (603)883-4400